TOP 10:
| Product code E00327 | Currently out of stock |  |
Silvering water "Serebrin"
Currently out of stock
A device for obtaining healthy drinking water saturated with silver ions , which can be used for disinfection, canning of drinks, disinfection of dishes and clothes, etc. The Serebrin water silverer is extremely easy to use: you just need to place the cartridge in a container of water, select the appropriate mode and wait for the saturation process to complete. The device works from the mains, so you will not need to worry about recharging batteries or replacing batteries. In addition, it features low power consumption of only 5 W, as well as compactness and low weight.
Silvering water "Serebrin" has a simple device and consists of an electronic unit and a cartridge
. What does the use of low-quality water lead to?
Did you know that the cause of most diseases is the use of poor quality water? Laboratory studies of tap water show that it contains microorganisms that can cause diseases of the internal organs when ingested, and when applied externally, adversely affect skin health. What to do? Completely abandon the use of tap water and switch to bottled? Expensive and inconvenient ... Boil? Also uncomfortable and long. Use chemical disinfectants? It is impractical, since "chemistry", although it effectively destroys microbes, can itself cause serious harm to health. Fortunately, there is a much more convenient, cheaper and safer way.
Silvering is the best way to purify water from harmful microorganisms!
Silvering is one of the best water purification methods. Why? First, unlike chemicals (tablets, powders, etc.), silver ions are completely safe for human health. Silvered water can be safely given even to small children! Secondly, silvering completely kills all harmful microorganisms, while conventional filters retain only part of the contaminants, and boiling does not guarantee absolute safety (recent studies have shown that some viruses and bacteria contained in water do not die even at 100 ° C! ).
Plus, the moderate content of silver ions makes water not only safe, but also healthy! "Silver" water can be used for drinking, washing, baths (especially for bathing small children!), washing dishes and disinfecting children's toys (without harmful detergents and other "chemistry"!), watering plants, inhalations, douching, etc. . Practice shows that "silver" water is an excellent tool for the treatment and prevention of various diseases. It strengthens the immune system, normalizes the digestive tract, helps with food poisoning, improves the condition of the skin and hair (for example, with teenage acne).
Even our ancestors guessed about the unique properties of silver ions - to make "healing" water, they put silver things in it or stored it in silver vessels. Many people use "grandmother's advice" and now, however, the preparation of "silver" water in this way takes too much time - from several days to a month. But modern water silverers (for example, "Serebrin") allow you to get safe and healing water in just a few minutes !
Advantages of silvering-ionizer of water "Serebrin":
- Compact dimensions . The weight of the device is about 100 grams, which makes it easy to store and transport it. Not every household silversmith can boast of such modest dimensions. At the same time, the size does not affect the functionality of the device at all - it has two modes of operation and allows you to process large volumes of water.
- Mains power 220 V allows you to forget that the batteries or the accumulator can be discharged at the most inopportune moment. At the same time, you should not worry about electricity consumption - the power of the device is only 5 W, which is 150-200 times less than the consumption of a conventional electric kettle.
- Simple and intuitive device management . Silvering water "Serebrin" is controlled by an electronic unit, which is also a power supply. It houses a power switch, a mode switch and a light indicator. All the user needs is to turn on the device, select the desired mode and place the cartridge in a container of water.
- Light indication of work. The silversmith "Serebrin" is equipped with a light indicator that lights up when the device is turned on. With it, you can easily determine whether the device is currently active.
- Does not require special maintenance . All that is needed is to keep the cartridge and electrodes clean. No recharging or changing batteries required!
silverer allows you to obtain ionic and colloidal solutions of silver using the electrolytic method, which involves passing a direct electric current through electrodes immersed in water. In this case, the process of the so-called anodic dissolution of silver takes place. Silver ions are released and dissolved in water, giving it useful properties. The degree of saturation of the solution with silver ions directly depends on the volume of water, as well as the current strength.
The device of the water
silverer Silverer "Serebrin" consists of two main parts:
- an electronic unit combined with a power supply;
- cartridge.
The cartridge is a "float" with electrodes in its lower part (the part that is immersed in water). As with many such devices, the anode is a 99.99% silver plate and the cathode is a stainless steel plate. The float cartridge is connected to the electronic unit via a special cable.
silversmithprepares "silver" water with almost any concentration of silver ions!
The device "Serebrin" can prepare both drinking and concentrated "silver" water. According to SanPiN 2.1.4.539-96, the concentration of silver ions in drinking water should not exceed 0.05 mg/l. However, this does not mean that there is no point in preparing more concentrated "silver" water. On the contrary, it is perfect for washing, cleaning (especially if there are children and / or sick people at home), disinfecting toys, cutlery, etc. Water with a high content of silver ions is an effective tool for the destruction of harmful microorganisms without the use of chemicals!
Everyone can use a silversmith!
It is quite simple to use the silvering agent, the whole process of work looks like this:
1. Prepare a container with water, using the table from the instruction manual for the device. Remember that the concentration of silver ions in a solution depends on the volume of water, so the larger the volume of water, the longer it will take to saturate it with silver.
ATTENTION! For silvering, water with a mineralization level of at least 100 mg / l is suitable. If you want to silver water with a lower mineralization value, then simply add table salt to the water. This is done as follows: dilute one teaspoon of salt in a glass of water, then add the solution to the treated water at the rate of: 0.5 teaspoon of the solution per 1 liter of water.
2. Connect the cartridge cable to the device electronics. Place the cartridge in water, and plug the electronic unit into an electrical outlet.
3. Select the desired mode using the switch on the electronic box. To enable mode 1, move the switch to the up position, and to enable mode 2, to the down position.
4. Press the power button. After that, the indicator will light up, indicating that the device is active.
5. Wait the required amount of time for the solution to saturate with silver ions. After that, turn off the power of the device (the device activity indicator will turn off), remove the cartridge from the container with the solution. Water can be consumed only after thorough mixing for 1-2 minutes.
One year manufacturer's warranty!
Water silverer "Serebrin" is able to provide a family of 3-4 people with silvered water for a year. With less intensive use, it will last much longer. The quality of the assembly and the materials from which the silver is made is very high, which allows the manufacturer to guarantee the uninterrupted operation of the device throughout the year. Specialists of the site www.oserebrim.ru draw your attention to the fact that the warranty does not cover mechanical and thermal damage to the device.
Specifications:
| Parameter | Value |
| Housing material | non-toxic plastic |
| Electrode material | silver 99.99%, stainless steel |
| The mass of silver in the electrode | 0.71 g |
| Electrode voltage | no more than 24 V |
| Power | 5 W |
| Food | from mains 220 V, 50 Hz |
| Silvering time (20 liters of water, 4.5 µg/l of silver ions) | 150 sec |
| Shipping weight | 100 g |
Contents of delivery:
- water silvering agent "Serebrin" (electronic unit);
- cartridge with electrodes;
- technical certificate;
- user manual;
- package.
Copyright © 2001- All rights reserved Lerson.ee
